• 2 months ago
title
2 mpr How to check transformer

About
hello doston khempur repair channel Mein aapka swagat Hai Doston mere pass Mein Aaj 2 AMP home theater ka Transformer Hai is transformer ko aaj main aapko check Karne Ka Tarika bataunga vah Bhi Do Tarah Se aap isko AC volt se bhi check kar sakte hain aur series se bhi Agar aapke pass me Digital Meter hai to aap usse bhi check kar sakte hain ya FIR jo aapko Aasan Tarika Lage Aap usse bhi check kar sakte hain Transformer sahi hai ya kharab hai work kar raha hai ya nahin kar raha hai yah sab aap Jaan sakte hain Khud aapko Kahin repairing shop per Le jaane ki jarurat nahin hai isliye video ko pura Dekhen Pasand Aaye To ek like Karen aur comment Karke bataen aapko yah video kaisa laga Milte Hain next video mein tab tak ke liye thank you

Instagram
https://www.instagram.com/khempurrepair/

playlist


#khempurrepair
#transformerrepair
#transformer
#transformercheck
Transcript
00:00Hello friends, welcome to Khempur Repair YouTube channel.
00:04Friends, I have this 12012 2 Amp Task Farmer.
00:08This task farmer is new.
00:10But if you don't have a new one,
00:12and it is an old task farmer,
00:14and your home theater is not working,
00:16because it is a home theater,
00:18that's why I am talking about home theater.
00:20If your home theater is not working,
00:22then you have a little confusion
00:24that there is a problem in the home theater
00:26or in the task farmer,
00:28then how will you find out?
00:30Or if you are installing an old task farmer
00:32in the home theater,
00:34then how will you check it,
00:36so that you know
00:38that if you have an old task farmer,
00:40then it is correct or not.
00:42So friends, I will tell you two ways.
00:44One, I will tell you how to check with the light.
00:46Second, I will tell you how to check
00:48with this type of digital meter
00:50that how you can check
00:52this task farmer,
00:54how you can find out
00:56whether it is working or not.
00:58It is going to be a very simple video.
01:00I am going to tell you in a very short time.
01:02Friends, first of all, what we have to do
01:04if we have an old task farmer,
01:06or if it is new,
01:08then you can check it in the same way.
01:10Whenever you check it with an AC volt light,
01:12then this red wire
01:14will be of AC volt.
01:16And these will be the output wires.
01:18These are also of AC volt.
01:20But the current in it,
01:22you can touch it with your hand.
01:24So there is no problem with this.
01:26Okay.
01:28We don't have to do anything
01:30with this red wire.
01:32For now, we have to connect
01:34this red wire with a main lead.
01:36Okay. So I have
01:38this type of main lead.
01:40You can see.
01:42You can connect both the wires
01:44with each other.
01:46Like I am doing.
01:48Keep in mind that
01:50whenever you want to check a task farmer
01:52for the first time,
01:54then you have to remember
01:56that if your task farmer is new,
01:58then there is no problem.
02:00New task farmers are very less bad.
02:02In an old task farmer,
02:04there may be a shortage.
02:06So if you have an old task farmer,
02:08then you don't have to connect it directly
02:10to the AC volt.
02:12If there is a shortage,
02:14then if you are doing it with an inverter,
02:16then the inverter may be damaged.
02:18If you are doing it with a light,
02:20then use a series testing board.
02:22Whenever you check anything
02:24that works with AC volt,
02:26like a task farmer or anything else,
02:28then you have to connect
02:30the first wire like this.
02:32Okay.
02:34And the second wire,
02:36you don't have to connect
02:38this wire with this.
02:40I will tell you this.
02:42If you need light,
02:44then check this task farmer with AC volt.
02:46Otherwise, you can do it with a meter.
02:48Now let me connect this plug
02:50to the power supply.
02:52I am connecting this to the series.
02:54Whenever you want to check,
02:56you have to check the series.
02:58Okay.
03:00This wire has AC volt.
03:02So you have to check it very carefully.
03:04First, you have to check
03:06whether the series is working
03:08by connecting both the wires.
03:10The series is glowing.
03:12I will show you the bulb.
03:14The series is working.
03:16Now you understand
03:18how to check the task farmer.
03:20First, you have to
03:22put it on the body and check.
03:24If your bulb burns a little,
03:26then your task farmer
03:28has a shortage of the body.
03:30Okay.
03:32You can also check
03:34this wire one by one.
03:36If your bulb burns on any wire,
03:38then you can understand
03:40that your task farmer is bad.
03:42Finally, you have to connect
03:44the plug to the series.
03:46The bulb is not burning at all.
03:48I can feel the voltage drop.
03:50There is also a spark.
03:52This shows that
03:54our task farmer is good.
03:56Now I will remove this plug
03:58from the board.
04:00You can check the shortage
04:02of the task farmer in this way.
04:04Now I have connected
04:06the other wire to the series.
04:08Now you have to connect
04:10the plug to the series again.
04:12You do not have to touch this.
04:14You have to keep the task farmer here.
04:16You have checked that there is no shortage
04:18in the task farmer.
04:20Now you touch the middle wire
04:22one by one with both the wires.
04:24There is a spark.
04:26Here too.
04:28There is no problem
04:30in the task farmer.
04:36There is no problem.
04:38In this way,
04:40the task farmer is checked with AC volt.
04:42This is the method of the series.
04:44How to check with the meter?
04:46I will tell you.
04:48For this, we have to do the same
04:50for the meter.
04:52We will know all this
04:54on continuity.
04:56I will switch on the meter
04:58and put it on continuity mode.
05:00This is a very easy method.
05:02If you do not have a meter,
05:04you can do it with the series.
05:06But you have to check very carefully.
05:08There are two props here.
05:10Red and black.
05:12You have to put it on both the wires.
05:14First, you have to check the continuity.
05:16The continuity here is
05:18149.
05:20It is 4849.
05:22This continuity is of the right task farmer.
05:24If your task farmer
05:26has a shortage,
05:28then you will get continuity around 3.
05:30You will get it around 1, 2, 3.
05:32That means there will be a shortage.
05:34If there is no continuity,
05:36you can understand
05:38that your task farmer is still bad.
05:40The first thing you have to check
05:42is that there is a continuity of 150.
05:44The second thing you have to do is
05:46put a prop on the body and check.
05:48There should be no continuity
05:50from the body.
05:52Not even 1, 2, 3.
05:54The third thing you have to do
05:56is to check these three wires one by one.
05:58You should not get anything here.
06:00There should be only one wire in your meter.
06:02Your task farmer
06:04is better than the AC wire.
06:06First, I have taken
06:08a 24 volt wire.
06:10Now, I will take a 12 volt wire.
06:12The continuity here is
06:143.
06:16This is fine for now.
06:18If we check this,
06:20the continuity here is 5.
06:22This is fine for now.
06:24Let's check this again.
06:26There should be 3 here.
06:28There is also 3 here.
06:30If the AC output
06:32is bad,
06:34then there will be no continuity of 3
06:36and there will be no beep.
06:38If there is no beep,
06:40then your task farmer is bad.
06:42This way, you can check
06:44any task farmer.
06:46Keep in mind that if the task farmer
06:48is bigger than 2 A,
06:50then you may see less or more
06:52continuity.
06:54If you like this video, like it, share it
06:56and comment on it.
06:58See you in the next video.
07:00Thanks for watching.

Recommended