How to Install Static Cling Window Film for Residential Custom Cut Size | GreenFilm USA
- 4 years ago
Installation steps for Custom Cut Static Cling Window film
Visit Our Website To Learn More:
https://www.greenfilmusa.com/
===============================================================
This video shows how to install Static Cling Window Film yourself using Greenfilm's residential window film steps by steps.
This video shows how to install Static Cling Window Film yourself. Here we use Greenfilm's residential window film steps by steps.
Installation
Before Installation:
Make sure all windows are clean and free of debris/dust. You can clean the window with the solution and squeegee or scraper to remove the dust on the window.
Step 1:
Place dry film onto the window. If the film has stuck to itself, place dry film onto the window and gently pull until flat.
Step 2:
Spray solution generously on both sides of the film.
Tip: Lift the top edges of the film and apply the solution.
Step 3: Squeegee the solution starting from the center to all edges.
If any bubbles remain, you can spray and squeegee again.
Be sure to use the squeegee on wet film to prevent damage to the film.
Tip: Before trimming, squeegee the edge of the window to make sure it does not move while trimming.
Step 4: Press the edge of the window using the cutting stick and trim excess film with cutting knife.
Final Step; Spray the solution onto film once more. Then cover squeegee with the napkin and apply firm pressure to ensure all edges are flat and solution are all pushed out.
Removing & Storing
Grab a corner of the film and pull gently to remove the film from the window. Place film on white paper and roll for storage.
Contact Us:
https://www.greenfilmusa.com/contact/
Email Us:
info@greenfilmusa.com
Call Us:
(972) 247-1176
Visit Our Website To Learn More:
https://www.greenfilmusa.com/
===============================================================
This video shows how to install Static Cling Window Film yourself using Greenfilm's residential window film steps by steps.
This video shows how to install Static Cling Window Film yourself. Here we use Greenfilm's residential window film steps by steps.
Installation
Before Installation:
Make sure all windows are clean and free of debris/dust. You can clean the window with the solution and squeegee or scraper to remove the dust on the window.
Step 1:
Place dry film onto the window. If the film has stuck to itself, place dry film onto the window and gently pull until flat.
Step 2:
Spray solution generously on both sides of the film.
Tip: Lift the top edges of the film and apply the solution.
Step 3: Squeegee the solution starting from the center to all edges.
If any bubbles remain, you can spray and squeegee again.
Be sure to use the squeegee on wet film to prevent damage to the film.
Tip: Before trimming, squeegee the edge of the window to make sure it does not move while trimming.
Step 4: Press the edge of the window using the cutting stick and trim excess film with cutting knife.
Final Step; Spray the solution onto film once more. Then cover squeegee with the napkin and apply firm pressure to ensure all edges are flat and solution are all pushed out.
Removing & Storing
Grab a corner of the film and pull gently to remove the film from the window. Place film on white paper and roll for storage.
Contact Us:
https://www.greenfilmusa.com/contact/
Email Us:
info@greenfilmusa.com
Call Us:
(972) 247-1176