Organize your entry with this quirky coat rack made from wooden hangers
- il y a 7 ans
Be The Envy Of All Your Friends With This Clever DIY Coat Rack
If you don’t have this stuff already lying around your house, you’ll need to grab a few things…
1× 5½ x 24-inch piece of wood, $27.42
Wooden hangers, $16.99
1¼-inch wood screws, $5.79
1¼-inch wire nails, $5.76
Hammer, $7.94
Drill, $17.99
Drill bit set, $4.91
Sandpaper, $6.38
1. Cut a 1 x 5.5 x 24 inch piece of wood ($27.42) and drill ($17.99) 5 holes that are equally spaced across the bottom of the board.
2. Use a jigsaw to cut 5 wooden hangers ($16.99) about an inch from the center. Use the sandpaper ($6.38) to smooth down the edges
3. Drill a hole in the hanger. Use a 1¼-inch wood screw ($5.79) to attach it to the board.
4. Secure the thin beam of the hanger with a hammer ($7.94) and a 1¼-inch wire nail ($5.76).
5. Repeat steps 2 through 4 until all of your hangers are attached.
6. Hang your crap.
If you don’t have this stuff already lying around your house, you’ll need to grab a few things…
1× 5½ x 24-inch piece of wood, $27.42
Wooden hangers, $16.99
1¼-inch wood screws, $5.79
1¼-inch wire nails, $5.76
Hammer, $7.94
Drill, $17.99
Drill bit set, $4.91
Sandpaper, $6.38
1. Cut a 1 x 5.5 x 24 inch piece of wood ($27.42) and drill ($17.99) 5 holes that are equally spaced across the bottom of the board.
2. Use a jigsaw to cut 5 wooden hangers ($16.99) about an inch from the center. Use the sandpaper ($6.38) to smooth down the edges
3. Drill a hole in the hanger. Use a 1¼-inch wood screw ($5.79) to attach it to the board.
4. Secure the thin beam of the hanger with a hammer ($7.94) and a 1¼-inch wire nail ($5.76).
5. Repeat steps 2 through 4 until all of your hangers are attached.
6. Hang your crap.