Electronic temperature indicator-A wonderful replacement for chemical indicator strips
- 9 years ago
www.temperaturemonitoringuae.com
Cold Chain Management division of Vacker supplies Electronic Temperature Indicators which is a great replacement for chemical temperature indicator strips.
Vacker operates in all Middle East countries including United Arab Emirates, Qatar, Oman, Saudi Arabia, Kuwait, Bahrain, Jordan.
This is a single use electronic temperature indicator for monitoring temperature of temperature sensitive products such as medicine, vaccine, bio samples, blood, food items, fruits, vegetables etcetera.
Traditionally we have been using chemical indicator strips for such purpose. However chemical indicators include a chemical substance which is dangerous for any of the above items. The electronic temperature indicator is the best alternative to chemical indicator strips.
The upper and lower levels of permitted temperature range can be programmed. This electronic temperature indicator has a red and green L E D to indicate whether the temperature has crossed these limits. If the temperature goes above or below the programmed limits, the red L E D will start blinking. At the end of the storage or transportation you can check the L E D before accepting the goods.
Starting the indicator is simple by pressing the power button for few seconds. We are programming three separate electronic indicators which are programmed for upper limit of 8 Degree and lower limit of 2 Degree Centigrade. These three units are now being kept under different storage temperature conditions. Now we will examine one by one and demonstrate the basic indication.
This indicator was kept inside a freezer and has gone below the lower temperature of 2 Degree and hence the red L E D is blinking once approximately every 7 seconds.
The second indicator was kept at room temperature and has gone above upper temperature of 8 Degree and hence the red L E D is blinking twice approximately every 6 seconds
The third indicator was kept in a freezer and thereafter at room temperature and has crossed both the upper and lower temperature levels. Hence the red L E D is blinking thrice approximately every 5 seconds.
The next few slides will indicate the operation manual.
This screen shows starting and delay for starting the monitoring. The next screen shows the alerts generated. This screen shows how to stop the device.
This is only an indicator and does not record the temperature. Hence it will not give the recorded readings during the storage or transportation period. If you require the readings to be recorded, please click at the link below to see our disposable single use U S B data loggers.
Vacker group supplies various temperature data loggers and recorders for any temperature range.
Vacker LLC
306, RKM Building,
Deira, Dubai
United Arab Emirates
Tel: 00971 42 66 1144
Email: sales.uae@vackerglobal.com
Cold Chain Management division of Vacker supplies Electronic Temperature Indicators which is a great replacement for chemical temperature indicator strips.
Vacker operates in all Middle East countries including United Arab Emirates, Qatar, Oman, Saudi Arabia, Kuwait, Bahrain, Jordan.
This is a single use electronic temperature indicator for monitoring temperature of temperature sensitive products such as medicine, vaccine, bio samples, blood, food items, fruits, vegetables etcetera.
Traditionally we have been using chemical indicator strips for such purpose. However chemical indicators include a chemical substance which is dangerous for any of the above items. The electronic temperature indicator is the best alternative to chemical indicator strips.
The upper and lower levels of permitted temperature range can be programmed. This electronic temperature indicator has a red and green L E D to indicate whether the temperature has crossed these limits. If the temperature goes above or below the programmed limits, the red L E D will start blinking. At the end of the storage or transportation you can check the L E D before accepting the goods.
Starting the indicator is simple by pressing the power button for few seconds. We are programming three separate electronic indicators which are programmed for upper limit of 8 Degree and lower limit of 2 Degree Centigrade. These three units are now being kept under different storage temperature conditions. Now we will examine one by one and demonstrate the basic indication.
This indicator was kept inside a freezer and has gone below the lower temperature of 2 Degree and hence the red L E D is blinking once approximately every 7 seconds.
The second indicator was kept at room temperature and has gone above upper temperature of 8 Degree and hence the red L E D is blinking twice approximately every 6 seconds
The third indicator was kept in a freezer and thereafter at room temperature and has crossed both the upper and lower temperature levels. Hence the red L E D is blinking thrice approximately every 5 seconds.
The next few slides will indicate the operation manual.
This screen shows starting and delay for starting the monitoring. The next screen shows the alerts generated. This screen shows how to stop the device.
This is only an indicator and does not record the temperature. Hence it will not give the recorded readings during the storage or transportation period. If you require the readings to be recorded, please click at the link below to see our disposable single use U S B data loggers.
Vacker group supplies various temperature data loggers and recorders for any temperature range.
Vacker LLC
306, RKM Building,
Deira, Dubai
United Arab Emirates
Tel: 00971 42 66 1144
Email: sales.uae@vackerglobal.com